Skip to main content
Geothermal Energy

Science – Society – Technology

Fig. 6 | Geothermal Energy

Fig. 6

From: Parameter identification and range restriction through sensitivity analysis for a high-temperature heat injection test

Fig. 6

Sensitivity of the Normalized Mean Average Error (NMAE) calculated from the measured and simulated temperatures to a the hydraulic parameters horizontal and vertical hydraulic conductivity kfh and kf.v, specific storage S0 and groundwater flow velocity va and b to the thermal parameters thermal conductivity λ and volumetric heat capacity c·ρ. Parameter ranges investigated correspond to the total range of values as given in Table 1

Back to article page