Fig. 4From: Parameter identification and range restriction through sensitivity analysis for a high-temperature heat injection testSimulated heat plume 2Â days after the hot water injection has stopped (31st of May at 7Â pm) for different values of vertical hydraulic conductivity kfv. The kfv value of a corresponds to the maximum from literature, b to the measured maximum, c is the base case, d is the measured minimum and e the literature minimum. The left-hand side figures show a vertical transect through the injection well along the groundwater flow direction, which is also marked in the right-hand side figures, which show a horizontal cross section in top view at 7.5Â m depthBack to article page