Fig. 14From: Monitoring cold water injections for reservoir characterization using a permanent fiber optic installation in a geothermal production well in the Southern German Molasse BasinComparison of flowmeter injection profile and DTS and DAS response during Inj2. Transparent lines are raw DTS data, sharp lines are moving average over 10Â m. a Flowmeter profile with five DTS profiles in the first hour of cold water injection over from 2750Â m MD to TD. b Zoomed to top of the reservoir. Flowmeter profile is shown together with three DTS profiles of injection start, each 20Â min apart; and DAS strain at 1Â min and 1.5Â min after injection startBack to article page