Skip to main content

Science – Society – Technology

Table 2 Varying parameters of the reservoir model. The lowest fault permeability of 0.75 mD is referred to as a sealing fault and the highest fault permeability of 750 mD as transmissive fault in “Results” section

From: Economic and fault stability analysis of geothermal field development in direct-use hydrothermal reservoirs

Parameter Value Unit
Flowrate 150, 225, 300, 375 \(\hbox {m}^{3}/\hbox {h}\)
Fault permeability 0.75, 7.5, 75, 750 mD
Injection temperature 303.15, 308.15, 313.15 K
Fault-to-Well Distance (FWD) 60, 90, 180, 360 m