Skip to main content

Science – Society – Technology

Fig. 3 | Geothermal Energy

Fig. 3

From: 3D geophysical inversion modeling of gravity data to test the 3D geologic model of the Bradys geothermal area, Nevada, USA

Fig. 3

Perspective towards the north of the 3D geological block model for the Bradys geothermal area used for 3D geophysical modeling. The geologic model shown corresponds to the local 3D geophysical model volume. The local model volume has the dimensions 8 km × 6 km × 2.5 km, is oriented northwest–southeast, and is centered approximately over the Bradys geothermal power plant. The 3D geologic model shown consists of cells 100 m × 100 m × 100 m. Colors represent different rock units shown in the legend. Rock unit codes are defined in Table 1. Coordinates are UTM NAD83 zone 11. Elevation is in meters

Back to article page