Science – Society – Technology
Table 3 ATES design parameters and respective values used in the box models
From: City-scale heating and cooling with aquifer thermal energy storage (ATES)
Parameter | Value | Unit | References |
|---|---|---|---|
Injection temperature cold water (1st kind BC) | 6 | °C | Hähnlein et al. (2011) |
Injection temperature warm water (1st kind BC) | 18 | °C | Hähnlein et al. (2011) |
Pumping rate (2nd kind BC) | 600 | m3 d−1 | According to typical existing GWHP systems in Freiburg |
Well diameter | 0.5 | m | According to typical existing GWHP systems in Freiburg |